Creating A Project With Step 7-Micro/Win - Siemens Simatic S7-200 CPU 210 System Manual

3.4

Creating a Project with STEP 7-Micro/WIN

To create a new project, select the menu command Project
Figure 3-12. The CPU Type dialog box is displayed. Select "PDS 210" from the drop-down
list box.
You can name your project at any time; for this example, refer to Figure 3-13 and follow
these steps to name the project:
1. Select the menu command Project
2. In the File Name field, type the following: house.prj
3. Click on the "OK" button.
Project
Project View CPU Setup Help
New...
Open...
1 c:\microwin\project1.prj
2 c:\microwin\project2.prj
3 c:\microwin\project3.prj
Exit
Figure 3-12 Creating a New Project and Selecting the CPU Type
Project Edit View CPU Debug Tools Setup Window Help Project
New...
Open...
Close
Save All
Save As...
Import
Export
Upload...
Download...
Page Setup...
Print Preview...
Print...
Print Setup...
Exit
Figure 3-13 Naming the Sample Project
S7-200 Programmable Controller, CPU 210
C79000-G7076-C235-01
Save As...
Ctrl+N
Ctrl+O
CPU Type
Select or read the CPU type from your PLC if you would like the software to
limit the available options to only those supported by a specific CPU.
CPU Type: PDS 210
OK
Ctrl+N
Ctrl+O
Ctrl+S
Save As Project
File name:
*.prj
sample.prj
Ctrl+U
Ctrl+D
Ctrl+P
Save file as type:
Project
Getting Started with a Sample Program
New..., as shown in
LAD STL DB1 SYM STAT
Read CPU Type
Communications...
Cancel
Enter project
name here.
Folders:
c:\microwin
c:\
microwin
backup
samples
Drives:
c:
OK
Cancel
Help
Network...
3-13