Panasonic CZ-256ESMC3 Technical Data Manual page 44

Various procedures
3 Remove the LCD and touch panel connectors. (Three places)
4 Temporarily mount the sheet metal on the back of the main unit (screw fastening not required), remove the
screws on the sides of the LCD with the LCD facing up. (Four places)
Screw
5 Lift the front side of the LCD forward and pull out the three cables.
Cables for Cables for
touch panel LCD backlight
Screw
Procedure for replacing touch panel LCD
Cables for LCD
Screw
Pull out the three cables
ー 42 ー
Screw