Chapter 1 Product Intro 1.1 Intro C76 device is a smart mobile PDA that integrated with various features such as UHF,, data acquisition, wireless transmission and data processing etc. It is configured with Andriod 6.0 OS and it possesses high reliability and expansibility.
Page 4
When battery operating time drops below about 80%, charging time will be increased remarkably. If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged.
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
2.2 Install Micro SD,cards 2.3 Battery Charging By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and Function Area C72 has 4 side buttons and 4 main keys, handheld connection port locates at rear, 2D scanning module and camera locate at top. POWER Function Key SCAN Main Button Buttons instruction Button Description 1.Power Located on left side, press to ON/OFF device. Side 2.Function key Located on left side, its function can be defined by software.
Chapter 3 Barcode reader-writer 1. In App Center, to open 2D barcode scan test. 2. Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted. Caution: Please scan codes in correct way otherwise the scanning will be failed.
5.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
Page 22
Communication WLAN IEEE802.11 a/b/g/n, 2.4G/5G dual-band, internal antenna WPAN Bluetooth 4.0 Data collection Barcode scanning 2D CMOS scanning engine RFID Developing Environment Chainway software develop kit Language Java Develop Eclipse/Android Studio...
Page 23
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 24
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.