(licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law.
H100 will not only provide better healthcare services to medical staffs and patients, but also it will be in favor of upgrading management works of hospital.
Page 7
This device can fully support fast 4G LTE network connectivity which makes it easy for mobile working, it configured with WIFI wireless connection to facilitate data transfer more stable. Meanwhile, H100 also support Bluetooth, it can connect various Bluetooth devices that...
1.2 Precautions before using battery Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly.
2.2 Install TF card and SIM card Use the ejector pin to open the cover from back side, SIM card socket and TF card socket can be found in following picture:...
2.3 Battery charge By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device. 2.4 Power button Switching-on or switching-off function can be executed by long press power button on the right for 3 seconds.
Chapter 4 Barcode reader 1. In the application App center to open “2D(S)”. 2. Click the key “Scan” or scanning button to start scanning. And the parameter auto interval can be set also.
Page 17
Caution: Please scan codes in correct way otherwise the scanning will be failed. 1D barcode: 2D code:...
Chapter 7 Fingerprint identification 1. Click icon “Setting” to enter system setup. 2. Click “Security”. 3. Click “Fingerprint” to enter fingerprint setup option.
Page 21
Click “CONTINUE” to setup. 4. Click “SET UP SCREEN LOCK” to continue setting up. 5. Setup spare screen unlock method to unlock without using fingerprint. Pattern, PIN code and password can be selected for different setup.
Page 22
6. After setting up spare unlock method, we should continue to setup fingerprint unlock. After find out fingerprint sensor, click “NEXT”. 7. Entering fingerprint according to instructions and this process will be repeated for a few times.
Page 23
8. If multiple fingerprints are needed, then click “ ADD ANOTHER” to enter other fingerprints, otherwise clicking “DONE”. 9. After this, the screen can be unlocked by fingerprint.
8.2 Bluetooth 1. In App Center, open “BT Printer” for test. 2. In the list of device searching, click the device that you want to connect to pair. 3. Select printer and click “Print” to start printing content.
Page 33
Multiple 1.5m/4.9ft drops to the concrete across the operating temperature range Data collection Scan engine Zebra SE4710 13.56MHz, ISO/IEC 18092 (ECMA 340) / ISO/IEC 21481 (ECMA 352) Fingerprint Capacitive Sensor Developing environment Chainway software development kit Language Java Tool Eclipse/Android Studio...