Related Manuals for Chainway C71
Summary of Contents for Chainway C71
- Page 1 Shenzhen Chainway Information Technology Co., Ltd. Mobile Data Terminal C71 User Manual...
-
Page 2: Table Of Contents
Content Content ..................1 Statement ..................3 Chapter 1 Product Intro ..............4 Intro ..................4 Precaution before using battery ........... 5 Charger ................6 Notes ................... 7 Chapter 2 Installation instructions............8 2.1 Appearance ................8 2.2 Install Micro SD and SIM cards ..........10 2.3 Battery charge ............... - Page 3 7.5 Sensor ................... 21 7.6 Keyboard ................22 7.7 Network ................. 23 7.8 Keyboard emulator ..............24 7.9 Fingerprint Module ..............25 7.10 Internal UHF ................ 26 Chapter 8 Device characteristic ............28 Appendix ..................30 Restrictions: ................. 30 Simplified EU declaration of conformity........31 SAR Information ................
-
Page 4: Statement
(licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. -
Page 5: Chapter 1 Product Intro
Chapter 1 Product Intro 1.1 Intro Chainway C71 with abundant functions is an Android rugged mobile computer. With its powerful processor, stable wireless connections and comprehensive data capture options, you can find this easy-to- deploy device a valuable helper to increase productivity in logistics, warehousing, retail, identity verification, meter reading, IC card reading and etc. -
Page 6: Precaution Before Using Battery
1.2 Precaution before using battery Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly. -
Page 7: Charger
1.3 Charger The charger type is NA010050020, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter. -
Page 8: Notes
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. -
Page 9: Chapter 2 Installation Instructions
Chapter 2 Installation instructions 2.1 Appearance... - Page 10 Buttons instruction Button Description 1.Power Located on left side, press to ON/OFF device. Side Located on left side, its function can be defined by software. 2.Function key button Scanning button located on both sides. There are two scanning 3.SCAN buttons. Display main menu.
-
Page 11: Install Micro Sd And Sim Cards
2.2 Install Micro SD and SIM cards The cards sockets are showing as follows:... -
Page 12: Battery Charge
2.3 Battery charge By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device. -
Page 13: Buttons And Function Area Display
2.4 Buttons and function area display C71 has 4 side buttons and 4 main buttons, NFC identification area 2D scanning module and Infrared scanning lens locates at front. HD camera, optical fingerprint sensor and flashlight locate at rear. -
Page 14: Chapter 3 Call Function
Chapter 3 Call function 3.1 Calling numbers 1. Click icon 2. Click number key to input phone numbers. 3. Click icon to call. 4. Click icon to end call. 3.2 Contacts 1. Click contacts to open contacts list. 2. Click icon to add new contacts. -
Page 15: Chapter 4 Barcode Reader-Writer
Chapter 4 Barcode reader-writer 1. In App Center, to open 2D barcode scan test. 2. Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted. Caution: Please scan codes in correct way otherwise the scanning will be failed. -
Page 16: Chapter 5 Infrared Read-Write Function (Optional)
Chapter 5 Infrared read-write function (Optional) 1. Open infrared function in App Center. 2. Click button “Open” to start infrared scanning function. Click “LED” for infrared scanning aim assist. Depending on different application status to compile different commands to realize infrared read and write function. -
Page 17: Chapter 6 Rfid Reader
Chapter 6 RFID reader 6.1 NFC Click App Center, open “NFC” to read and write tag information. -
Page 18: Chapter 7 Other Functions
Chapter 7 Other functions 7.1 PING tool 1. Open “PING” in App Center. 2. Setup PING parameter and select external/internal address. -
Page 19: Bluetooth
7.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents. -
Page 20: Gps
7.3 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information. -
Page 21: Volume Setup
7.4 Volume setup 1. Click “Volume” in App Center. 2. Setup volume by requirements. -
Page 22: Sensor
7.5 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements. -
Page 23: Keyboard
7.6 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device. -
Page 24: Network
7.7 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements. -
Page 25: Keyboard Emulator
7.8 Keyboard emulator The keyboard emulator can be used in multiple operating background and output formats directly. And it includes Prefix/Suffix/Enter/TAB. Please check Keyboard emulator manual for more details. -
Page 26: Fingerprint Module
7.9 Fingerprint Module 1. Click “Fingerprint(morpho)” in Appcenter. 2. Click “acquisition” after module has initiated successfully and click “CleanAll”. 3. Select “Security Level” to 0 and click “set” and “get”. 4. Click “Enroll” and put your finger on captor and follow the tips to start capture fingerprint. -
Page 27: Internal Uhf
7.10 Internal UHF Click App Center, open “UHF” to scan, read and write tag information, also kill and lock tags. -
Page 29: Chapter 8 Device Characteristic
Chapter 8 Device characteristic Physical characteristics Size 164.2mm*78.8mm*17mm Weight <260g(battery included) Display 5.2 inch，IPS FHD 1920*1080P Touch panel 4 main keyboards, 1 power button, 2 scan buttons, 1 multi-function button Battery Li-ion, rechargeable, 5000mAh Expansion Supports up to 32 GB Micro SD card Expansion Slot 1 slot for SIM card, 1 slot for SIM or TF card Audio... - Page 30 CDMA2000 EVDO: BC0 TD-SCDMA: A/F B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B28A/B28B/B38/B 39/B40/B41 WLAN IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna Bluetooth Bluetooth 5.0, BR+EDR+LE, Supports 1M and 2M Data collection Barcode Zebra: SE4710 scanning RFID NFC 13.56Mhz Developing Environment Chainway software develop kit Language Java Develop Eclipse/Android Studio...
-
Page 31: Appendix
Appendix Restrictions: AT BE BG HR CY CZ DK EE FI FR DE GR HU IE LV LT LU MT NL PL PT RO SK SI ES SE UK(NI) This device is restricted to indoor use where operated in the European Community using frequency in 5150MHz-5350MHz to reduce the potential for interference. -
Page 32: Simplified Eu Declaration Of Conformity
Simplified EU declaration of conformity Hereby, Shenzhen Chainway Information Technology Co., Ltd. declares that the radio equipment type C71 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.chainway.net... -
Page 33: Sar Information
SAR Information The SAR limit of Europe is 2.0 W/kg. Device types C71 has also been tested against this SAR limit. The maximum SAR value was 0.2 W/kg for the head, 1.344 W/kg for the body, 2.919 W/kg for the limbs. This device was tested for typical body-worn operations with the back of the handset kept 0.5cm from the body. - Page 34 For CE: Frequency bands and power Operation Bands Max.Power Frequency 880- 33.5 dBm 915MHz 1710- 1800 31.5 dBm 1785MHz 1920- 21.5 dBm 1980MHz WCDMA 880- 24 dBm 915MHz 1920- 21 dBm 1980MHz 1710- 25 dBm 1785MHz 2500- 21 dBm 2570MHz 880- 24.5 dBm 915MHz...
- Page 35 2620MHz 2300- 21 dBm 2400MHz 2402-2480 EIRP 9.60 Bluetooth 2.4GHz 2412- EIRP 17.96 2.4GHz 2472MHz 5180- EIRP 15.42 5240MHz 5260- EIRP 13.31 Wi-Fi 5320MHz 5GHz 5500- EIRP 17.35 5700MHz 5745- EIRP 13.79 5825MHz 865.7- RFID 19.787 867.5MHz 1559- GNSS 1610MHz -16.07 dBμA/m at 13.56MHz...
- Page 36 FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.
- Page 37 The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types C71(FCC ID: 2AC6AC71P) has also been tested against this SAR limit. The exposure standard for wireless mobile hotspots employs a unit of measurement known as the Specific Absorption Rate, or SAR.
- Page 38 this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
- Page 39 une distance de séparation minimale de 10 mm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir des composants mé talliques. Il est possible que les accessoires utilisé s prè s du corps qui ne ré pondent pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé...