System Connections - Tait T2004 System Manual

2.4

System Connections

T2004 Multi-Control Head System Manual
© Tait Electronics Limited May 2004
Each control head connects to the system network via the Micromatch to
RJ45 Cable, which plugs into the RJ45 Wallbox. The RJ45 Wall boxes are
fitted at intervals along a multi-drop cable.
The radio also connects to the system network via the Micromatch to RJ45
Cable, which plugs into the X2AM01 Multi-Head Radio Interface. The
other end of the cable plugs into an RJ45 Wallbox, which is fitted at one
end of the multi-drop cable. See system diagram earlier for block overview
of system.
System Overview 19