System Overview - Tait T2004 System Manual

2

System Overview

T2004 Multi-Control Head System Manual
© Tait Electronics Limited May 2004
The T2004 Multi-Control Head system allows the use of between one and
five control heads with a single T2020 or T2040 radio. The control heads
are configured as one Primary and up to four Secondary. The Primary
control head is the only one which controls the radio's power, as well as
power to each Secondary control head, otherwise the functionality of all the
control heads is the same. Advantages: radio to control head length able to
be greater than the standard 6m cable.
The Multi-Control Head system consists of two kits, designed to connect to
your existing Series II T2020 or T2040 radio and T2008 power supply:
the T2004-A20 (T2020) or the T2004-A40 (T2040) Primary Multi-
Control Head Kit (one required per system).
the T2004-A21 (T2020) or T2004-A41 (T2040) Secondary Multi-
Control Head Kit (not required if only one control head is used in the
system).
The T2004-A20 or T2004-A40 Primary Head Kit provides the Primary
control head as well as the Radio Interface PCB. This PCB is housed inside
a dummy (Clayton's) control head and replaces the standard control head on
the radio. The radio can be concealed if required, as all radio controls are
now done via the Primary control head.
The T2004-A21 or T2004-A41 Secondary Head Kit provides one
Secondary control head and other equipment needed to install the control
head for use with the radio.
System Overview 13