System Equipment - Tait T2004 System Manual

2.3

System Equipment

T2004-A20 and T2004-A40 Primary Multi-Control Head Kit Parts
16 System Overview
The Multi-Control Head system includes the following components:
one T2020 or T2040 radio with T2008 power supply unit (existing)
2km maximum Multidrop Line (not supplied)
one T2004-A20 or T2004-A40 Primary Multi-Control Head Kit
between one and four T2004-A21 or T2004-A41 Secondary Multi-
Control Head Kit (optional)
The T2004-A20 or T2004-A40 Primary Multi-Control Head Kit are listed
below:
Qty IPN
1 X2H221 or X2H241 T2020 or T2040 Primary Control Head
1 X2AM01
2 219-02900-00
2 240-04051-00
2 349-00010-33
4 349-00010-22
1 316-06433-02
1 316-85125-00
1 219-02907-00
1 M2004-00-000-315 Installation manual
1 252-00010-49
1 302-05211-00
2 350-01007-00
4 360-01057-00
a. For more information about the X2H221 or X2H241 Primary Control Head, see Part
B of this manual.
b. For more information about the X2AM01 T2020/40 Multi-Control Head Radio Inter-
face board, see Part C of this manual.
This kit provides the Primary control head as well as the Radio Interface
PCB. This PCB is housed inside a dummy (Clayton's) control head and
replaces the standard control head on the radio. The radio can be concealed
if required, as all radio controls are now done via the Primary control head.
Description
T2020/40 Multi-Control Head Radio Interface
Micromatch to RJ45 cable
RJ45 Screw Terminal Wallbox
Screw, #6*3/4: S/T P/P (bracket to wall)
Screw, 4-20x3/8 P/P Trilb-P BZ (dummy head to radio)
Dummy (Clayton's) control head
T2000 Plate cover
Power/ Speaker cable (no plug pack)
Microphone clip
Head mounting bracket
Head thumb screws
Screw hole covers
T2004 Multi-Control Head System Manual
© Tait Electronics Limited May 2004
a
b