Tait T2004 System Manual page 17

T2004-A21 and T2004-A41 Secondary Multi-Control Head Kit Parts
T2004 Multi-Control Head System Manual
© Tait Electronics Limited May 2004
A speaker and microphone are not provided as part of the Primary Multi-
Control Head Kit, as the Primary control head uses the speaker and
microphone already supplied with the radio.
The T2004-A21 or T2004-A41 Secondary Multi-Control Head Kit parts
are listed below:
Qty IPN
1 X2H222 or X2H242 T2020 or T2040 Secondary Control Head
1 219-02900-00
1 240-04051-00
2 349-00010-33
1 005-00000-40
1 252-00010-76
1 219-02907-00
1 M2004-00-000-315 Installation manual
1 252-00010-49
1 302-05211-00
2 350-01007-00
a. For more information about the X2H222 or X2H242 Secondary Control Head, see
Part B of this manual.
This kit provides one Secondary control head and other equipment needed
to install the control head for use with the radio. Between one and four
Secondary Multi-Control Head Kits can be installed as part of your system.
Each control head can be installed anywhere on a multi-drop line up to
2000M long, and is powered locally by a mains-operated DC plug pack. A
speaker plugs into each control head to provide local Rx audio and Tx audio
from other control heads in the system.
Description
Micromatch to RJ45 cable
RJ45 Screw Terminal Wallbox
Screw, #6*3/4: S/T P/P (bracket to wall)
T2000 Speaker Kit (incl. mount)
T2000 microphone
Power/ Speaker cable (no plug pack)
Microphone clip
Head mounting bracket
Head thumb screws
a
System Overview 17