Gamma; Zoom (Sdm-X72/X82 Only); Smoothing - Sony SDM-X52 Operating Instructions Manual

GAMMA

You can associate the picture's color shade on the screen with the
picture's original color shade.
GAMMA
GAMMA 1
GAMMA 2
GAMMA 3
1 2 8 0 x
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M/m buttons to select
press the OK button.
The GAMMA menu appears on the screen.
3
Press the M/m buttons to select the desired mode.
ZOOM
(SDM-X72/X82 only)
The monitor is set to display the picture on the screen in full,
irrespective of the picture's mode or resolution in the default
setting (FULL2).
You can also view the picture in its actual aspect ratio or
resolution.
ZOOM
F U L L 2
F U L L 1
R E A L
1 2 8 0 x
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M/m buttons to select
press the OK button.
The ZOOM menu appears on the screen.
3
Press the M/m buttons to select the desired mode.
• FULL2 (The default setting): The input signal is
displayed on the screen in full, irrespective of the
picture's mode or resolution.
• FULL1: The input signal is displayed on the screen at its
actual aspect ratio. Therefore, black bands may
appear at the top and bottom of the picture
depending on the signal.
• REAL: The input signal is displayed on the screen at its
actual resolution. Sub-1280 × 1024 signal is
displayed at the center of the screen surrounded
by a black frame.
Note
• When using the SDM-X72/X82 model with 1280
signals, the above mentioned settings are not available. The picture is
displayed on the screen in full.
• SDM-X52 can only display the picture on the screen in full.
1 0 2 4 / 6 0 H z
E X I T
(GAMMA) and
1 0 2 4 / 6 0 H z
E X I T
(ZOOM) and
×
1024 resolution

SMOOTHING

If the picture displayed at the FULL2 or FULL1 mode of ZOOM
is not smooth, use the picture smoothing function.
SMOOTH NG
T E X T
S TA N DA R D
G R A P H C S
1 2 8 0
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M/m buttons to select
and press the OK button.
The SMOOTHING menu appears on the screen.
3 Press the M/m buttons to select the desired mode.
The smoothing effect becomes stronger in the order of
TEXTtSTANDARDtGRAPHICS.
• TEXT: To make the characters appear clear. (This mode is
suited for text-based applications.)
• STANDARD (The default setting): Standard smoothing
effect.
• GRAPHICS: To make the pictures appear clean. (This
mode is suited for CD-ROM software such as
photo images or illustrations.)
Note
• When you set the (ZOOM) menu to REAL, the
(SMOOTHING) menu is not available.
• 1024 × 768 (SDM-X52), 1280 × 1024 (SDM-X72/X82) resolution
signals are shown only in REAL mode and SMOOTHING is not
possible.
I
I
x 1 0 2 4 / 6 0 H z
E X I T
(SMOOTHING),
15
GB