Identifying Parts And Controls - Sony SDM-X52 Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front of the LCD display
Side view of the LCD display
Rear of the display stand
1 1 (Power) switch and 1 (power) indicator
(pages 9, 17, 22)
This switch turns the monitor on when the 1 (power)
indicator lights up in red. To turn the monitor off, press this
switch again.
If the 1 (power) indicator does not light up, press the MAIN
POWER switch (8).
2 MENU button (page 12)
This button turns the menu screen on and off.
3 M/m and 2 (volume) buttons (page 12, 17)
These buttons are used to select the menu items and make
adjustments, and also display the VOLUME menu to control
the volume.
4 OK button (page 12)
This button activates the selected menu item and adjustments
using with M/m buttons (3).
5 INPUT button and INPUT1/INPUT2 indicator
(page 11)
This button selects the connected computer for switching the
video input signals, and the corresponding indicator,
(INPUT1 or INPUT2) lights up.
6 ECO button (page 18)
This button is used to reduce the power consumption.
7 Stereo speakers (page 17)
These output the audio signals as sound.
8 MAIN POWER switch (page 9)
This switch turns the monitor's main power on and off.
9 Headphones jack (page 17)
This jack outputs audio signals to the headphones.
0 Security Lock Hole
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
GB
(continued)
5