Adjusting "Color Temp." (For Pc Signal Only); Adjusting "Gamma" (For Pc Signal Only); Resetting Picture Mode To The Default - Sony SDM-H246W Operating Instructions Manual

x Adjusting "Color Temp." (for PC signal only)
You can select the picture's color level for the white color field
from the default color temperature settings.
Also, if necessary, you can fine tune the color temperature.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the m/M buttons to select "Color Temp." and
press the OK button.
The "Color Temp." menu appears on the screen.
Picture
Mode:
Backlight:
Contrast:
Brightness:
Color:
Hue:
Sharpness:
Color Temp.:
Gamma:
Picture Mode Reset sRGB
Select
4 Press the m/M buttons to select the desired color
temperature and press the OK button.
Whites will change from a bluish hue to reddish hue as the
temperature is lowered from 9300K to 6500K (default
setting).
When you select "sRGB," the colors adjust to the sRGB
profile. (The sRGB color setting is an industry-standard color
space protocol designed for computer products.) If you select
"sRGB," the color settings of your computer must be set to the
sRGB profile.
Notes
• If a connected computer or other equipment is not sRGB-compliant,
color cannot be adjusted to the sRGB profile.
• If you select "sRGB," you cannot adjust "Contrast", "Brightness" and
"Gamma" in the "Picture" menu.
Fine tuning the color temperature
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the m/M buttons to select "Color Temp." and
press the OK button.
The "Color Temp." menu appears on the screen.
4 Press the m/M buttons to select "Adjust" and press
the OK button.
The fine tuning menu for color temperature appears on the
screen.
R 160
G 128
B 75
(Picture) and
DVI-D
Movie
100
85
50
9300K
6500K
User
Adjust
1920 × 1200/60 Hz
Set Exit
OK MENU
(Picture) and
16
5 Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
6 Press the m/M buttons to select
OK button.
The new color setting is stored in memory and automatically
recalled whenever "User" is selected.
The "Color Temp." menu appears on the screen.
x Adjusting "Gamma" (for PC signal only)
You can associate the picture's color shade on the screen with the
picture's original color shade.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the m/M buttons to select "Gamma" and
press the OK button.
The "Gamma" menu appears on the screen.
Picture
Mode:
4 Press the m/M buttons to select the desired mode
and press the OK button.
x Resetting Picture Mode to the default
You can reset the adjustments to the default settings.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the m/M buttons to select "Picture Mode
Reset" and press the OK button.
The "Picture Mode Reset" menu appears on the screen.
Picture
Mode:
(GB)
, then press the
(Picture) and
DVI-D
Movie
Backlight: 100
Contrast: 85
Brightness: 50
Color:
Hue:
Sharpness:
Color Temp.: 6500K
Gamma: Gamma1
Picture Mode Reset Gamma2
Gamma3
Gamma4
1920 × 1200/60 Hz
Select Set Exit
OK MENU
(Picture) and
DVI-D
Movie
Backlight: 100
Contrast: 85
Brightness: 50
Color:
Hue:
Sharpness:
Color Temp.: 6500K
Gamma: Gamma4
Picture Mode Reset OK
Cancel
1920 × 1200/60 Hz
Select Set Exit
OK MENU