Table of Contents
Advertisement
User Manual
SB-DN-Logic960
module. to modify the address, fill in the new address, and click the "Modify initial
address "Click the "+Add" button, the device will be added to "ON-line devices "list.
Method two:
1- Run HDL-bus pro tool
2- Search for the online devices by clicking on search button and the device will be
displayed on "online device list"
4.1.2 Remark
To give a name to the module, so you can recognize it from other modules.
4.2 Configurations
As mentioned above the logic module is used for automating other HDL modules.
And in this tab, we will see how to setup a logic table with input conditions.
4.2.1 Equipment activation
If this option is unchecked, it means that the logic module has been disabled and will no
longer perform any process.
4.2.2 Input conditions
First select a logic table from the "logic No" list, double click on the blank black area to
start configuration and then select a logic relation from (AND, OR, XOR, NAND) according
to your requirements.
Logic timer – User Manual
5
Hide quick links:
Advertisement
Table of Contents
