Table of Contents
Advertisement
User Manual
SB-DN-Logic960
Application 5 – Trigger the next scene when one of any toggle
switch is toggled.
Requirement
Use the existing toggle buttons to trigger the scenes in a dimmer in this way – When the
toggle switch is pressed, no matter the status of the toggle switch is ON or OFF as long as
there is an action, the scene should be changed to next one, (a circle): scence1->Switch
toggled -> scene2 -> Switch toggled -> scene3 -> Switch toggled -> scene1...
Acknowledge
A Hongkong customer raised this typical application, HDL RnD Dept. manager Dicky
provided the simple solution.
Configuration - Logic module
Setup some logic tables with some outputs, each logic should have two pins( two
conditions) and both of them should be UV switch
N.B:- The "Automatically detect re-trigger enable" option should be ticked (selected) in
each logic table
Targets (output)
Logic timer – User Manual
20
Hide quick links:
Advertisement
Table of Contents
