System Setting; 1: Date Settings For Timer; Geographic Location Settings; Geographic Location - HDL SB-DN-Logic960 User Manual

User Manual
SB-DN-Logic960

4.3 system setting

4.3.1 Date settings for timer
Before using the logic module and starting configuring it, you must set the current date
and time. The current date and time settings are used as standard timer settings for
functions that require date and time, you can set your PC's date and time by just clicking
on "PC time "and "save"
-you can also broadcast the time to HDL-bus so other devices can receive the time
settings from the logic module , just tick on " Broadcast Time" option.

4.3.2 Geographic location settings

4.3.2.1 Geographic location

You can manage location settings in logic module through the system settings tab.
You can also set the particular point of your place on the surface by setting the latitude
(LAT) and longitude (LONG) points, or you can just find your country and city in the
system by clicking on "location"
P.s:- configuring the location settings help the system to calculate the sunrise and sunset
time for that particular location
Logic timer – User Manual 13