Table of Contents
Advertisement
User Manual
SB-DN-Logic960
5 applications
Application 1 – Irrigation schedule
Requirement
Turn on the irrigation at 9 a.m. on every Sunday for 40 minutes; end-user has a button to
enable/disable the schedule logic.
Note
The water valve is controlled by a relay channel of a Relay module.
Configuration – Logic module
Logic
(1):- it has three conditions 1-week type (Sunday), 2-time type (9am) and 3- UV (19)
should be ON,
Target (output):-
The target relay must set ON
(2):- its linked to logic (1), to do that:- a) Right click on logic(1) and select " confirm
Logic
start point"
b) and then right click on Logic(2) and select "confirm end point"
-set delay time for logic(2), 40minutes in this example, so after 40 minutes it will be OFF
Target
(output):- set the relay this time as OFF
Logic timer – User Manual
15
Hide quick links:
Advertisement
Table of Contents
