HDL SB-DN-Logic960 User Manual page 23

User Manual
SB-DN-Logic960
Each logic table will send out the fallowing:-
a) OFF command to UV-switch (21) {common UV switch for all the three tables}...
b) ON command to the next table (UV switch) and off to the other 2 tables
c) Also turn ON a specific scene...
E.g:- table (1) output should be like this....
Table (2) output..
Table (3) output
Configuration - Dry contact
On the dry contact first we need to assign three switches ( channels) to send commands
to the logic module by sending UV switch , for example in this solution we send UV(21)
which means the dry contact send commands to all the three tables because all of them
share UV(21)...
N.B:- The switch type should be Mechanical switch , so there will be two
mechanical switch for each switch (mechanical switch ON and mechanical switch
Logic timer – User Manual 21