User Manual
SB-DN-Logic960
4.2.3 Additional settings
a) Delay time settings
When a trigger is applied, the logic module will postpone the output according to the delay
time that you set on your logic table.
P.s: if you send many input commands to the logic module and there is a delay time, the
logic will calculate the delay time and the action maybe delayed longer than the expected
time.
b) Automatically detect re-trigger enable
if this option selected means every time the logic module receives a command,
it will re-trigger the target again, no matter the target is already triggered or not.
Logic timer – User Manual
12