User Manual
SB-DN-Logic960
4. Software Configurations
4.1 Basic setting
4.1.1 Change the ID of the device
Each HDL-device has subnet and Device ID and each module's Device ID must be unique
and different from other devices on the same Bus, the subnet ID should be the same as
the HDL-Bus gateway
(typically the SB-DN-1IP or HDL-MBUS01IP.431).
Method One:
1. Run the HDL-BUS Pro Setup tool.
2. Long press the "programming button" and keep pressing it for 3 seconds until it turns to
a red color.
3. On the software, click ton "Address management", and select
"Modify address (when device button is pressed)" option, it will show a window like
below:
4. click on "Indicate initial address", then it will show the current subnet/device ID of this
Logic timer – User Manual
4