Related Manuals for Sony DWT-B01N
Summary of Contents for Sony DWT-B01N
- Page 1 4-585-173-04 (1) Digital Wireless Transmitter Operating Instructions DWT-B01N © 2015 Sony Corporation...
-
Page 2: Table Of Contents
Notes on simultaneous multi-channel Table of Contents operation ............18 Note on microphone and transmitter combinations ............18 Specifications ............19 Features ..............3 Carrier Frequencies and Channel Steps ....20 Parts Identification ........... 4 Power Supply ............. 5 Installing the batteries ..........5 Setting the Transmission Channel ...... -
Page 3: Features
The DWT-B01N is designed to be extremely compact and lightweight, essential qualities for use by artists in fast- moving TV and outdoor productions. The DWT-B01N is a digital wireless transmitter for a UHF synthesized wireless microphone system to be used for Switchable mic or line input level and broadcast or movie production purpose. -
Page 4: Parts Identification
f POWER switch Parts Identification Turns the transmitter ON or OFF. g Battery compartment Accommodates two LR6 (size AA) alkaline batteries. For details on how to insert the batteries, see “Power Supply” on page 5. h SET button Adjusts displayed function settings and enters the value. Holding down the SET button while switching on the power turns the transmitter on without sending a signal. -
Page 5: Power Supply
• When BATTERY TYPE is set to TYPE1, the power status is indicated based on the use of new LR6 (size AA) Sony Alkaline batteries. An incorrect indication may result when a different kind of batteries, a different brand of batteries or old batteries are used. If you plan to... -
Page 6: Setting The Transmission Channel
Set the transmitter group (GP) and channel (CH) as follows: For details on groups and channels, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. For details on menu operation, see “Basic Menu Operations”... -
Page 7: Using The Cross Remote
goes up, RF REMOTE turns on, and the remote Using the Cross Remote control function becomes operative. To use the Cross Remote with a previous This transmitter is equipped with a wireless remote control pairing function that can be used to set the parameters (low-cut In the RF REMOTE indication, select ON. -
Page 8: Using The Encrypted Transmission Function
When the RF REMOTE function is off, REMOTE Using the Encrypted cannot be selected. Note Transmission Function When the receiver does not support encryption key exchange through USB connection, select REMOTE. To prevent hacking of the signal, the transmitter scrambles When you select USB: Connect the transmitter to the receiver using a USB the signal during transmission. -
Page 9: Using A Usb Keyboard
Note Using a USB Keyboard It is recommended that you change the password periodically. Connecting an optional USB keyboard to the transmitter allows you to perform menu operations and enter your name and password for the encrypted transmission function from the keyboard. A Micro USB connector is used on the transmitter. -
Page 10: Basic Menu Operations
For details about the frequency range of each band, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. Using wireless remote control, this function can be controlled from the receiver and other devices. -
Page 11: Selecting The Group/Channel (Gp/Ch)
off the transmitter first. Then, while holding down the microphone as you monitor the input level meter and press SET button, turn the power on. Then change the setting the + or – button repeatedly to select the appropriate after the signal transmission has stopped. attenuation level. -
Page 12: Setting The Battery Type (Battery Type)
TYPE1: The power status is indicated based on used to suppress noise and audio interruptions caused by characteristics of new LR6 (size AA) Sony Alkaline unexpected interference, resulting in more reliable batteries. Select this for LR6 (size AA) alkaline batteries. -
Page 13: Locking The Power Switch (Power Sw Lock)
Note Automatic dimming of the display If the transmitter is turned off while the reference signal (DIMMER MODE) function is on, the function will turn off automatically. The organic light-emitting diode display can be set to dim Using wireless remote control, this function can be or turn off after a certain amount of time. -
Page 14: Attaching With The Soft Case
Rear Attaching With the Soft Hook and loop fastener Case The transmitter can be attached to the user with the supplied soft case. Changing the direction of the belt clip The belt clip attached to the rear of the soft case can be rotated 0, 90, 180, or 270 degrees in relation to the unit. -
Page 15: Attaching The Antenna Tubes
Fig. 2 Attaching the Antenna Tubes Belt Noise may occur if the antenna attachment areas come into contact with metallic objects. Attaching the antenna tubes will prevent accidental contact of the antenna attachment areas with metallic objects. Note Do not pull on the antennas when attaching or removing the antenna tubes. -
Page 16: Block Diagram
Block Diagram Attenuator Digital signal processor Head amp. Low-cut filter Audio High- A/D converter codec frequency modulator circuit Internal SG... -
Page 17: Troubleshooting
If you encounter a problem using this transmitter, use the following checklist to find a solution. For any problems with the receiver or adapter, refer to the operating instructions supplied with the respective device. If the problem persists, consult your Sony dealer. Symptom... -
Page 18: Important Notes On Operation
- near public address loudspeakers The use of portable telephones and other communication - where adjacent equipment might knock against the devices near the DWT-B01N may result in malfunction and tuner interference with audio signals. It is recommended that Keep the transmitter as far from such equipment as portable communication devices near the DWT-B01N be turned off. - Page 19 MODE set to AUTO OFF) WHATSOEVER. Operating temperature • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY 0 °C to 50 °C (32 °F to 122 °F) KIND MADE BY USERS OF THIS UNIT OR MADE BY Storage temperature THIRD PARTIES.
- Page 20 Carrier Frequencies and Channel Steps Underlined items are the factory setting. Channel step: 25 kHz Model No. Frequency band Frequency Group/channel (factory setting) TV14-17 470.125 - 493.875 MHz 14UC (TV14-25) TV18-21 494.125 - 517.875 MHz 00 1801 494.125 MHz TV22-25 518.125 - 541.875 MHz TV30-33 566.125 - 589.875 MHz...
- Page 21 Sony Corporation...