Iscsi - Logicube ZClone Xi User Manual

OPTIONAL: Tap Role to select the role for this repository. By default, it is set to "Both"
Source (Master) and Destination (Target). Tap OK when finished.
To delete a repository, tap the delete icon. A confirmation screen will appear. Tap Yes to
permanently delete the repository from the list.

5.8.2 iSCSI

This screen allows a user to add a repository using the iSCSI protocol.
To add a repository using the iSCSI protocol, an iSCSI Target must be setup on the
remote system. Since networks are configured differently, a Systems Administrator or
Network Administrator may be needed to set up the iSCSI protocol.
Once the iSCSI Target has been setup, click Settings.
Input the iSCSI target portal, username and password. Tap the OK icon when finished.
Tap Role and input the role for the iSCSI server then tap OK.
Logicube ZClone™Xi User's Manual
In order for a repository to remain configured when the unit
is turned off, the changes must be saved and loaded to a
profile. Details on profiles can be found in
TYPES OF OPERATIONS
Section 5.9.1.
55