Wipe / Format; Target - Logicube ZClone Xi User Manual

5.4 Wipe / Format

This type of operation allows the user to erase, wipe, and/or format one or more Target
drives. The following wipe or format methods are available: Secure Erase, Wipe Patterns,
and Format.
Secure Erase – Sends a command to the drive instructing it to perform a secure erase based on

the drive manufacturer's specifications for the secure erase command.

Wipe Patterns – Allows the user to set a specific pattern to use for wiping the drive. The number
of passes is customizable (up to 7 passes) along with the type of data written for each pass. In
addition, a 7-pass DoD wipe can be set with pre-selected pass values.
Format – Formats the Target drive with one of the following user selectable file systems (with or

without encryption): EXT4 or NTFS.
The following selections are available when performing a wipe:

Target


Settings

Case Info

5.4.1 Target
Tap this icon to choose a drive to erase, wipe, and/or format.
A screen will appear, allowing the selection of one or more targets. Tap the drive(s) to be
erased, wiped, and/or formatted then tap OK.
Logicube ZClone™Xi User's Manual
TYPES OF OPERATIONS
43