Download Print this page

Specifications - Branick 500 Installation, Operation & Repair Parts Information

Nitrogen inflation systems

Advertisement

 Before using this product, read and fully understand the operating
instructions and all decals on the product. This is necessary to
prevent injury to the operator and damage to the product.
 Do not attempt to use this product for anything other than its
intended purpose.
 Use of this product should be in a suitably ventilated shop.
 Operate valves slowly to prevent damage to coalescing filter.
 Use of this product is only permitted in places free from explosion
or fire hazard.
.

SPECIFICATIONS ___________________________________________________________

Max Compressed Air Supply
Dimensional data
Weight
Specifications shown below are at an air temperature of 75° F (24° C) and a supply air pressure of 160psi (11.0
bar). These specifications are intended to be a baseline to result in the production of 95% pure Nitrogen. The
output flow of Nitrogen has been pre-set to 7.1 scfm (11.4 Nm³/hr) per membrane. Changes to air temperature,
supply air pressure or supply air flow will change the result of Nitrogen purity.
Model Supply Air Pressure
#
500
1000
1500
* These are minimum settings. The purity can be increased by rotating the purity adjustment dial clockwise
When supply air temperature increases
When supply air pressure increases
When supply air flow decreases
When supply air temperature decreases
When supply air pressure decreases
When supply air flow increases
Rotating purity adjustment dial clockwise
Rotating purity adjustment dial
counter-clockwise
psi
bar
160
11.0
160
11.0
160
11.0
Change
CAUTION
Supply Air Flow
scfm
Nm³/hr
13.8
22.2
27.6
44.4
41.4
66.6
Note
Supply air flow requirement will
increase
N
output flow will decrease
2
N
output flow will remain the same
2
N
output flow will decrease
2
N
output flow will increase
2
2
175 psi (10.3 to 12.0 bar)
19 x 19 x 72.50 in (48 x 48 x 184 cm)
Model 500
185 lbs (84 kgs)
Model 1000
210 lbs (95 kgs)
Model 1500
235 lbs (107 kgs)
Maximum
Output N
Flow
2
scfm
Nm³/hr
Purity
7.1
11.4
95%*
14.2
22.8
95%*
21.3
34.2
95%*
Nitrogen Purity
Nitrogen Purity
Nitrogen Purity
stays the same
Increase Purity
Decrease Purity
N
2
Result
increases
decreases

Hide quick links:

Advertisement

loading

This manual is also suitable for:

10001500