Page 1
Installation, Operation MODEL 450/650 & Repair Parts NITROGEN INFLATION Information SYSTEMS Branick Industries, Inc. • 4245 Main Avenue • Fargo, North Dakota 58103 P/N: 81-0108G REV120418...
SAFETY INSTRUCTIONS DEFINITIONS SPECIFICATIONS INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS COMPONENT IDENTIFICATION MAINTENANCE MODEL 450 REPAIR PARTS MODEL 650 REPAIR PARTS WARRANTY SAFETY INSTRUCTIONS _____________________________________________________ ▪ NEVER allow unauthorized personnel to operate this product. ▪ NEVER use this product for anything other than its intended use.
150 to 175 psi (10.3 to 12.0 bar) Dimensional data 7.5 x 20 x 46.5 in (19 x 51 x 118 cm) Weight Model 450 100 lbs (45.36 kgs) Model 650 120 lbs (54.43 kgs) Specifications shown below are at an air temperature of 75° F (24° C) and a supply air pressure of 160psi (11.0 bar).
INTENDED USE _____________________________________________________________ This Nitrogen Inflation System is a pneumatic device designed to generate deoxygenated air for the purpose of inflating vehicle tires. INSTALLATION INSTRUCTIONS _______________________________________________ 1. Unpack and remove unit from shipping carton and pallet. 2. Inspect unit for any visible damage. 3.
MAINTENANCE _____________________________________________________________ NOTE: To avoid personal injury or damage to Nitrogen Inflation System, permit only qualified personnel to perform maintenance. When cleaning or replacing filter elements and automatic float drains, shut off supply air by turning power button on front of unit to “OFF”. Press pressure relief button on front panel to exhaust all trapped air.
MODEL 450 REPAIR PARTS __________________________________________________ ITEM PART NO. DESCRIPTION 028-155 #10-24 X 5/8 RD HD SCREW 055-105 5/16-18 SF HEX LOCK NUT 055-127 #10-24 NYLOCK NUT 096-039 3/8-1/4 REDUCER BUSHING 096-155 1/4 NPT STREET TEE 108-110 1/4 SAE FLAT WASHER...
Page 9
ITEM PART NO. DESCRIPTION 60-0114 CHECK VALVE 60-0115 FLOW CONTROL VALVE 60-0124 1/4 X 1/4 NPT FEMALE ELBOW 60-0132 3/8 NPT STREET TEE 60-0134 3/8 NPT HEX NIPPLE 60-0139 REDUCER 60-0167 2-1/2" PSI PANEL MOUNT GAUGE 60-0171 1/4 UNION TEE 60-0172 1/4 X 1/4 NPT MALE SWIVEL ELBOW 60-0173...
Replacement is the exclusive remedy for defective product under this warranty. This warranty is expressly in lieu of all other warranties, including any implied warranty of merchantability or any implied warranty of fitness for a particular purpose of this product. Branick industries, inc. Shall not be liable for any consequential or incidental damages.