Related Manuals for Branick 5130
Summary of Contents for Branick 5130
- Page 1 Installation, Operation MODEL 5130 & Repair Parts Tire Repair Station Information Branick Industries, Inc. • 4245 Main Avenue • Fargo, North Dakota 58103 P/N: 81-0305 REV081721...
-
Page 2: Installation
Always wear appropriate eye protection. INSTALLATION 1) Position the Model 5130 on a solid level floor. Bolting to floor is recommended. 2) Attach a 1/4 NPT quick coupler nipple (not provided) onto the inline filter located on the back of the column base. -
Page 3: Maintenance
MAINTENANCE Monthly Inspect spreader for excessive wear or damage. Wipe cylinder shaft clean of debris and check for damage. Every 6 Months Check inline filter and replace if needed. Check arm pivots, slide bolts and washers, quick pins, and hook pivot pins for wear or damage and replace if needed. -
Page 4: Main Assembly
MAIN ASSEMBLY... - Page 5 ITEM PART NO DESCRIPTION 01-0264 TIE ROD ASSEMBLY 03-0252 SPREAD HOOK 03-0299 TOOL TRAY 03-0674 SPREAD ARM 03-0676 FOOT GUARD 40-0020 LED LIGHT 11-0109 ADJUSTMENT KNOB 020-024 PRESS ON CAP 028-012 5/16 X 3/4 SCREW 028-041 1/4 X 1 SCREW 028-066 3/8 X 3-1/4 SCREW 028-304...
- Page 6 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 7 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 8: Commercial Warranty
During the warranty period, at the discretion of Branick management, if the product is found to be defective, it will be repaired or replaced without charge. For service, contact Branick (800-437-4394) to obtain an RMA.