Transport, Packaging And Storage - WIKA FLR Series Operating Instructions Manual

4. Transport ... / 5. Commissioning, operation

4. Transport, packaging and storage

4.1 Transport
Check the level sensor for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
CAUTION!
With improper transport, a high level of damage to property
can occur.
▶
Observe the symbols on the packaging
▶
Handle packed goods with care
4.2 Packaging and storage
Do not remove packaging until just before commissioning.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
5. Commissioning, operation
Observe all instructions given on the shipment packaging for remov-
■
ing the transportation safety devices.
Remove the level sensor carefully from the packaging!
■
When unpacking, check all components for any external damage.
■
5.1 Functional check
Prior to installation, a functional test of the level sensor can be carried
out with a resistance measuring instrument and manual movement of
the float.
Operating instructions level sensor, model FLR
EN
11