Adjusting The Brightness And Contrast; Adjusting The Centering Of The Picture (Center); Adjusting The Size Of The Picture (Size) - Sony Trinitron CPD-E220E Operating Instructions Manual

x Using the control button
1
Display the main MENU.
Press the center of the control button to display the main
MENU on your screen.
MENU
2
Select the menu you want to adjust.
Highlight the desired menu by moving the control button
towards the rear to go up (M), towards the front to go down
(m), and left (<) or right (,) to move sideways.
FRONT
MENU
REAR
3
Adjust the menu.
Move the control button left (<) or right (,) to make the
adjustment.
MENU
4
Close the menu.
Press the center of the control button once to return to the
main MENU, and twice to return to normal viewing. If no
buttons are pressed, the menu closes automatically after about
30 seconds.
MENU
x Resetting the adjustments
Press the RESET button. See page 11 for more information on
resetting the adjustments.
RESET
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for all input signals.
1
Move the control button in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
Move the control button m/M to adjust the
2
MENU
brightness (
(6).
The menu automatically disappears after about 3 seconds.
Adjusting the centering of the
picture (CENTER)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
Move the control button m/M to highlight
2
CENTER and press the center of the control button
again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
the control button </, to adjust the centering.
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
Move the control button m/M to highlight
2
CENTER and press the center of the control button
again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
control button </, to adjust the size.
BR I GHTNESS / CONTRAST
2 6 2 6
H : 6 8 . 7 k H z V : 8 5 H z
1 0 2 4 X 7 6 8
), and </, to adjust the contrast
(H-CENTER) for horizontal adjustment, or
(V-CENTER) for vertical adjustment. Then move
(H-SIZE) for horizontal adjustment, or
(V-SIZE) for vertical adjustment. Then move the
GB
SIZE/
SIZE/
9