Napoleon CLEARion Series Installation And Operation Manual page 22

operating instructions
EN
Ember Bed Controls the brightness of the ember bed light.
Brightness
Note: If the ember bed color is set to C11, the ember bed
brightness setting cannot be changed.
Settings:
b-5 - Brightest
b-4 - Bright
b-3 - Medium
b-2 - Dim
b-1 - Dimmest
b-0 - Off
Ember Bed Color Controls ember bed light settings.
Note: Ember bed brightness must be between b-5 and b-1 to
control ember bed color.
Settings:
C1 - Orange
C2 - Red
C3 - Blue
C4 - Yellow (may appear light white/green in colour)
C5 - Green
C6 - Purple (may appear same colour as C8 Magenta)
C7 - Sky Blue
C8 - Magenta (may appear same colour as C6 Purple)
C9 - White
C10 - Pink
C11 - Cycle through all colours (in order: Sky Blue, Magenta,
Purple, Pink, Red, Orange, Yellow, Green.)
C12 - Lock a color during C11 cycle.
Flame Speed Controls flame speed.
There are 5 flame speed settings: S-1 to S-5. S-1 is the slow-
est setting and S-5 is the fastest setting.
Heater Turns the heater and blower on/off.
Settings:
OFF - Heater and blower off
BL - Blower on
H1 - Heater on (1500W @ 120V and 3000W @ 240V)
H- - Lock-out of heater and thermostat
(Press and hold the heater button for 5 seconds to lock /
unlock the heater and thermostat).
Note: Each side of the appliance has an independent heater
control. Lock-out will disable both sides of the appliance.
Timer Sets the timer.
There are 9 timer settings: 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,
8H.
Note: Display will read 0.0H after completing the 9 timer
settings.
22
W415-1767 / F / 07.20.18