Maintenance - Hyundai HYSC210 User Manual

7. MAINTENANCE

WARNING
ALWAYS stop the engine, disconnect the spark plug HT lead and allow the engine to
cool completely BEFORE carrying out any maintenance or repairs.
NEVER touch a rotating blade.
Check and maintain the oil and fuel level every use.
Frequently check the scarifier and make sure that all deposits are removed before use.
At regular intervals, check the tightness of all nuts, bolts and screws.
If the blade hits and obstacle, check for damage and if the machine vibrates badly,
STOP the machine and take it to a service dealer.
CAUTION
All maintenance or repair work should be carried out by a certified engineer or service
dealer.
CAUTION
ALWAYS fuel and defuel in a well ventilated area with the engine off and cool.
Whilst carrying out any maintenance, you must wear the appropriate Personal
Protective Equipment (PPE).
CAUTION
NEVER use a pressure washer or hose to clean the scarifier.
Water can penetrate areas of the unit and cause damage to spindles, pulleys, bearings
or the engine.
The use of pressure washers or hose pipes will result in shortened life and reduce
serviceability.
Shut down the engine, wait for all moving parts to come to a complete stop, remove the
HT lead cap and wait for the engine to cool BEFORE performing any maintenance.
SPARK PLUG
6.0 Always replace with the same model spark plug as fitted.
6.1 Remove the spark plug HT lead cap.
6.2 Undo the spark plug from the engine and remove.
6.3 Visually inspect the spark plug for signs of damage, wear or carbon build up.
6.4 If damaged or worn, replace immediately.
6.5 To clean the spark plug, gently clean the electrode with a soft wire brush.
The spark plug gap should be 0.70mm – 0.80mm.
6.6
16