Starting Procedure - Hyundai HYSC210 User Manual

4. STARTING PROCEDURE

NOTE
This machine is shipped without fuel and oil and MUST be filled before use.
Failure to do so may cause damage to the engine that will not be covered by warranty.
Oil: 600ml SAE 15w40 Semi Synthetic Engine Oil
Fuel: 3.6L Straight Unleaded Petrol
CAUTION
ALL FUELS ARE FLAMMABLE
ALWAYS fuel and defuel in a well ventilated area away from sources of ignition.
CAUTION
The engine and exhaust will remain hot for a while after use.
Ensure the engine and exhaust has cooled before carrying out any maintenance,
refuelling or storage.
COLD START
3.0 Turn the engine switch to the ON position (1).
3.1 Move the fuel tap to the ON position (2).
3.2 Move the choke lever to the OFF position (3).
3.3 Pull back and hold the Operator Presence Control lever towards the main handle (1).
3.4 Gently pull the recoil starter handle until you feel resistance, then pull swiftly until
the engine starts (2).
3.5 Move the choke lever back to the ON position (3).
12