Using The Appliance - Philips QP6520 Manual

Using the appliance

Note: This appliance can only be used without cord.
You can use the appliance to trim, edge or shave facial hair
(beard, moustache and sideburns). Shave for a smooth
result, trim to obtain a certain length and edge to create
perfect edges and sharp lines. This appliance is not intended
for shaving, edging or trimming hairs on lower body parts
or scalp hair. Take your time when you first start to use the
appliance. You have to acquire practice with the appliance.
Switching the appliance on and off
1 To switch on the appliance, press the on/off button
once.
2 To switch off the appliance, press the on/off button
once.
Before you use the appliance, always check the
blade for damage or wear. If the blade is
damaged or worn, do not use the appliance, as
injury may occur. Replace a damaged blade
before you use the appliance (see chapter
'Replacement').
Shaving tips and tricks
- Make sure that the blade is in full contact with the skin
by placing it flat on the skin.
- For the best result, move the appliance against the grain.
- Make long strokes while pressing lightly.
- You can use the appliance dry or wet with gel or foam.
You can even use the appliance in the shower.
- Shaving a clean beard and face gives the best results.
1 Switch on the appliance.
Note: Make sure you hold the surface of the blade flat
against your skin.
2 Place the blade on the skin and move the appliance up
or against the grain in long strokes while you press it
lightly.