Table of Contents
Advertisement
Guarantee restrictions
Troubleshooting
Problem
I cannot switch
appliance appliance when it
when it is is charging. You can connected to the
only use the
mains.
Problem
The appliance does
not work anymore.
The blade is not covered by the terms of the international
guarantee because it is subject to wear.
This chapter summarizes the most common problems you
could encounter with the appliance. If you are unable to
solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked
questions or contact the Consumer Care Center in your
country.
Possible cause
You cannot use the
from the mains before use.
appliance without
cord.
Possible cause
The rechargeable
battery is empty.
Solution
Disconnect the appliance on the
Solution
Charge the appliance (see
chapter 'Charging'). During
charging, the battery charge
indicator flashes white. If the
battery charge indicator does
not flash, check whether there
is a power failure or if the wall
socket is live. If there is no
power failure and the wall
socket is live but the battery
charge indicator still does not
flash, take the appliance to your
dealer or a Philips service
center.
Advertisement
Table of Contents
