Charging; Using The Appliance; Optimising The Lifetime Of The Rechargeable Battery; Trimming With Comb - Philips QT4005 User Manual

General
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.

Charging

period of disuse.
It takes approximately 10 hours to fully charge the appliance.
to 35 minutes.
Note: For safety reasons, the epilator can only be used cordlessly. Make sure
the appliance is charged before use.
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the appliance.
3 Put the adapter in the wall socket.
The charging light on the adapter lights up green continuously to
indicate that the appliance is charging.
Note: The charging light on the adapter does not change colour and does not
go out when the appliance is fully charged.
4 After charging, remove the adapter from the wall socket and pull the
appliance plug out of the appliance.

Optimising the lifetime of the rechargeable battery

use it until the battery is completely empty. Continue to use the appliance
until the motor almost stops running during a session. Then recharge the

Using the appliance

start trimming.
too fast. Make smooth and gentle movements.

Trimming with comb

1 Turn the Precision Zoom Lock™ adjustment ring to the
desired setting. The selected setting is the setting in the centre of the
adjustment ring.
See the table below for an overview of the settings and the resulting hair
lengths.
ENGLISH
5