Table of Contents
Advertisement
-
The supply unit is suitable for mains voltages ranging from 100 to
240 volts.
-
The supply unit transforms 100-240 volts to a safe low voltage of
less than 24 volts.
-
Maximum noise level: Lc = 75 dB(A).
Charging
Battery status indicator QP6520
Battery status indicator QP6510
Note: This appliance can only be used without cord.
QP6520, QP6510: Charging takes approx. 1 hour. A fully
charged appliance has an operating time of up to 90
minutes (QP6520) or 60 minutes (QP6510).
Charge the appliance before you use it for the first time and
when the charge symbol indicates that the battery is almost
empty.
-
When the charge symbol flashes orange, the battery is
almost empty. The remaining battery capacity is
indicated by the battery status percentage shown on the
display.
-
To indicate that the appliance is charging, the charge
symbol flashes white.
-
Quick charge: after approx. 5 minutes charging, the
appliance contains enough energy for 5 minutes using.
During quick charge the charge symbol flashes white
quickly until quick charge is finished.
-
The battery is fully charged when the battery status
percentage shown on the display is 100% and the charge
symbol lights up continuously.
-
Approx. 30 minutes after the battery is fully charged or
when you disconnect the appliance from the mains, the
display switches off automatically.
Advertisement
Table of Contents
