Advertisement
Length settings
The selected hair length setting will show above
the zoom wheel when you select the desired
length setting with the zoom wheel (Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the
appliance before first use and when the bottom
light of the battery status indicator flashes orange.
1
Make sure the appliance is switched off.
2 Put the supply unit in the wall socket and put
the small plug in the appliance (Fig. 7).
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 60 minutes.
Using the appliance
Note: This appliance can be used without cord or
directly from the wall socket.
You can use this appliance for a stubble beard and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less messy trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after each
use.
Switching the appliance on and off
Press the on/off button once to switch the
appliance on or off (Fig. 8).
Trimming without comb
- You can use the appliance without beard and
stubble comb to trim hair close to the skin or to
contour the neckline and sideburns. To trim hair
close to the skin, place the flat side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9).
- For contouring, hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 10).
Trimming with comb
Note: When you trim for the first time, start at the
highest length setting to familiarise yourself with
the appliance.
You can use the beard and stubble comb attached
to the cutting element to groom your beard and
moustache in your preferred style. For the beard
and stubble comb, you can turn the zoom wheel to
choose from 20 length settings ranging from
0.5mm to 10mm in steps of 0.5mm.
Note: Switch off and clean the appliance after each
use.
1
Attach the comb onto the appliance (Fig. 11).
2 Turn the zoom wheel to select the desired
length setting (Fig. 6).
Note: When you trim for the first time, start at
the highest length setting to familiarize yourself
with the appliance.
3 Switch on the appliance.
4 To trim most effectively, move the appliance
against the hair growth direction. Make sure that
the surface of the comb always stays in contact
with the skin (Fig. 12).
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1
Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb (Fig. 13) and clean it with the
cleaning brush and/or rinse it under the tap
(Fig. 14).
4 Remove the cutting element and clean it under
the tap (Fig. 15). Carefully shake off excess
water and let the cutting element air-dry
completely.
Caution: Never dry the cutting element with a
towel or tissue, as this may damage the trimming
teeth.
5 Shake out the hairs that have collected in the
hair chamber.
6 Brush out the hairs with the cleaning brush (Fig.
16) or cleaning sponge (Fig. 17) supplied.
7 After cleaning, reattach the cutting element (Fig.
18) and comb (Fig. 11) to the appliance.
Recycling
- Do not throw away the product with the normal
household waste at the end of its life, but hand
it in at an official collection point for recycling.
By doing this, you help to preserve the
environment.
- This product contains a built-in rechargeable
battery which shall not be disposed of with
normal household waste. We strongly advise
you to take your product to an official collection
point or a Philips service centre to have a
professional remove the rechargeable battery.
- Follow your country's rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Removing the rechargeable battery
Only remove the rechargeable battery when
you discard the product. Before you remove
the battery, make sure that the product is
Advertisement
