Operation; Check Points Before Operation - Titan TT-CBC1580SZ Owner's Manual

Operation

CHECK POINTS BEFORE OPERATION:
* Have you remove all packing materials and tape from the interior and exterior of the unit?
* Have you installed the unit properly by following the installation instructions?
Has the unit been properly connected to the electrical outlet including proper grounding?
*
* Have you leveled the unit?
* Is the appliance properly located in an area where the ambient temperature is between 50°F
and 95°F all year round?
* Is the clearance of the unit, at least 2 to 3 inches at the rear provided for proper air
circulation?
THE CONTROL PANEL
This unit has a temperature range from 38°F to 65°F (or 3°C to 18°C)
The factory preset is 43°F (6°C)
F
BUTTONS
Power Button: Press and hold for three seconds to power on the unit. Once pressed the "Power"
indicator light will lit up to indicate the unit is running. Press and hold the button for three
seconds again, the unit will power off and the "Power" Indicator light will turn off.
Light Switch: Press this button to turn on/ off the interior LED light.
Increase Temperature: To adjust the temperature, press button to increase the temperature by 1
degree increments.
Decrease Temperature: To adjust the temperature, press button to lower the temperature by 1
degree increments.
This unit can be displayed in Fahrenheit or Celsius. Press and hold both buttons at the
same time for 5 seconds to change the setting.
www.titan-appliances.com
10