Iii.2 Rear Panels; Iii.2.1 Power Supply; Iii.2.2 Audio Interfaces; Iii.2.2.1. Digital Audio Aes/Ebu Stereo Input/Output - Prodys QLST Hardware And Reference Manual

III.2 Rear Panels

There are two different rear panel configuration depending on the kind of
input/ouputs: analog or digital:

III.2.1 Power supply

QLST comes supplied with an AC/DC converter (12 volts output) to be connected
to the power connector <VDC INPUT> located at the rear panel. The power
converter works with an AC input range of 100 to 240 VAC, 50 to 60 Hz.

III.2.2 Audio interfaces

III.2.2.1. Digital audio AES/EBU STEREO input/output

An AES/EBU interface is available via three XLR connectors on the rear panel of
the unit. The central connector provides the option to connect an externally
synchronised signal. The user can select via software if the digital output is to
synchronise with the audio input or with an external sync signal. The connectors
are wired in the following way:
Prodys S.L. Tel: +34 91 6896880  Fax: +34 91 6943777  Email:
Picture 5. QLST rear panel (digital)
Picture 6. QLST rear panel (analog)
Page 10
 Web:
sales@prodys.net www.prodys.com