Whilst counter-holding the adjusting
bolts with a screwdriver, tighten
the nuts on the appliance door
with a ring spanner .
The cover strip must be com-
pletely hidden in the niche, and must
not protrude.
Drill the holes in the furniture door
and fit the screws . Make sure the
two metal edges are aligned
(symbol //).
Close the appliance door and the fur-
niture door.
- Depth adjustment (Z)
Loosen the screws at the top of
the appliance door and the screw
on the fixing bracket at the bottom.
By moving the furniture door, create a
gap of 2 mm between the furniture
door and the housing unit.
Installation
79