Display warnings
Message
"F0 to F9" appears in
the display.
The alarm symbol
lights up in the display
and an alarm sounds.
The alarm symbol
flashes in the display.
Cause and remedy
There is a fault.
Call the Miele Service Department.
The door alarm has been activated.
Close the appliance door. The alarm symbol
will go out and the alarm will stop.
The temperature in the freezer zone has risen above
or fallen below the temperature which has been set.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
– A prolonged power cut (mains outage) has oc-
curred.
Rectify the cause of the alarm. The alarm symbol
will go out, and the alarm will stop sounding.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
Problem solving guide
47