Switching on and off
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Cleaning the appliance
Please refer to the relevant instruc-
tions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
20
Operating the refrigeration ap-
pliance
A light touch of the finger on the sensor
controls is all that is required to operate
this refrigeration appliance.
Every touch of a sensor is confirmed
with an audible keypad tone. This
keypad tone can be switched off (see
"Selecting further settings" – "Audible
tones").
Switching the refrigeration appliance
on
When the refrigeration appliance is con-
nected to the electrical supply, the
power connection symbol will ap-
pear in the display after a short while.
Touch the On/Off sensor.
The refrigeration appliance will start
cooling. The power connection sym-
bol will go out and the temperature
display will appear.
The temperature display and the alarm
symbol will flash at the same time
until the required temperature is
reached. If the current temperature in-
side the appliance is above 0 °C, two
bars will flash in the display.
When the appliance door is opened, the
interior lighting comes on and the LED
lighting becomes brighter until it
reaches its maximum brightness.