Miele FN 35402 i Operating And Installation Instructions page 75

 Snap off any protruding ends from
the fixing bracket. They are no longer
required.
 Replace covers  and  on the fix-
ing brackets.
Only for an appliance with a niche
height greater than 140 cm
For additional stability of the appliance
in the unit, push the rods supplied in
underneath the appliance between it
and the floor of the housing unit:
 Then secure handle  to one of the
rods .
 Use the handle to push the rod into
the guide as far as it will go. Remove
the handle and fit it to the other rod
and push this into its guide as far as it
will go.
Important. Keep the handle some-
where safe in case you ever need to
fit the appliance into a new housing
unit.
 Close the appliance door.
Installation
75