Remove cover .
Secure the securing plate using
screws loosely into the top left-
hand side of the appliance. Do not
tighten the screws so that you can
adjust the position of this part.
Fit stopper onto fixing bracket .
Screw fixing bracket with
screws loosely into the bottom of
the appliance. Do not tighten the
screws so that you can adjust the po-
sition of this part.
Carefully remove the protective foil
from sealing strip .
Fix sealing strip flush with the front
of the appliance on the door opening
side.
1. Position the sealing strip flush with
the lower edge of the top fixing.
2. Stick it down along its entire length.
Installation
71