Yamaha Clavinova CVP-205 Service Manual page 12

• Rear view
Speaker box assembly R
6. FU60 Assembly, FU60 Circuit Board
(Time required: About 10 minutes)
6-1 Remove the FU assembly. (See procedure 5.)
6-2 Remove the two (2) screws marked [3C]. The FU60
assembly can then be removed. (Fig. 8)
6-3 Remove the two (2) screws marked [1A] and the two (2)
screws marked [6B]. The FU60 circuit board can then be
removed. (Fig. 8)
6-4 Remove the two (2) screws marked [4A]. (Fig. 8) (General
export model only)
7. A-JACK Circuit Board, D-JACK Circuit Board
(Time required: About 10 minutes)
7-1 Remove the jack unit. (See procedure 5.)
7-2 Remove the four (4) screws marked [4B]. The A-JACK
circuit board can then be removed. (Fig. 9)
7-3 Remove the five (5) screws marked [4C]. The D-JACK
circuit board can then be removed. (Fig. 9)
• FU Assembly
[3C]
FU60 assembly [4A]
[1A]: Bind Head Tapping Screw-B 3.0x8 MFZN2BL (EP600190)
[3C]: Bind Head Tapping Screw-1 3.5x16 MFZN2BL (EP030260)
[4A]: Bind Head Screw 3.0x10 MFZN2BL (EG330380)
[6B]: Bind Head Tapping Screw-B 3.0x12 MFZN2Y (VE683000)
[6A] x 8
Speaker box assembly L
[5c] Woofer
[5c]: Bind Head Tapping Screw-1 4.0x16 MFZN2BL (EP040250)
[6B]
FU60
[3C]
[1A]
Fig. 8
[6A] x 8
Woofer
Fig. 7
• Jack Unit
D-JACK
[4C] [4C]
[4]: Bind Head Tapping Screw-B 3.0x8 MFZN2BL (EP600190)
CVP-205/CVP-205M
[5c]
A-JACK
[4C] [4B] [4B]
Fig. 9
12