Yamaha Clavinova CVP-205 Service Manual page 19

Hide thumbs Also See for Clavinova CVP-205:
Table of Contents

Advertisement

CVP-205/CVP-205M
Front board assembly
[BB]
[BB]
[BB]: Truss Head Screw 4.0x14 MFZN2BL (VB931700)
[BC]: Truss Head Screw 4.0x14 MFZN2BL (VB931700)
24.
Stand Base Assembly
(Time required: About 10 minutes)
24-1
With a soft cloth like a blanket placed on the floor. Place
the main unit gently so that the keyboard side is faced
toward the top. (Fig. 26)
*
For safety, this work should be done by two persons.
24-2
Put thick books or the like under the main unit at both
sides. (Fig. 26)
24-3
Remove the three (3) screws marked [8C]. The stand base
assembly can then be removed. (Fig. 26)
*
The left and right stand base assembly each can then be
removed in the same manner.
25.
Pedal Box Assembly, Pedal Assembly
(Time required: About 15 minutes)
25-1
Remove the back board assembly. (See procedure 4.)
25-2
Remove the PK-LF cable. (Fig. 11)
25-3
Remove the two (2) screws marked [BC]. (Fig. 24)
25-4
With a soft cloth like a blanket placed on the floor. Place
the main unit gently so that the keyboard side is faced
toward the top. (Fig. 27)
*
For safety, this work should be done by two persons.
25-5
Remove the four (4) screws marked [CB]. The pedal box
assembly can then be removed. (Fig. 27)
25-6
Remove the eight (8) screws marked [6C] and the screw marked
[7E]. The pedal assembly can then be removed. (Fig. 28)
Book
[8C]: Pan Head Tapping Screw-1 4.0x65 MFZN2Y (VV444000)
19
[BC]
Fig. 24
Stand base assembly L
Soft cloth
[8C]
Fig. 26
[BD]
Side board assembly R
[CA]
[CA]: Truss Head Screw 6.0x25 MFZN2BL (VQ448400)
[BD]: Truss Head Screw 4.0x14 MFZN2BL (VB931700)
Fig. 25
[CB]
[CB]: Truss Head Screw 6.0x25 MFZN2BL (VQ448400)
Fig. 27
Side board assembly L
[CB]
Soft cloth
Pedal box assembly

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clavinova cvp-103m

Table of Contents