Replacing Printer Paper - QBC Diagnostics Star Operators & Service Manual

QBC STAR™ System User's Manual

Replacing Printer Paper

When the printer paper is nearly exhausted, a colored edge appears on the roll of paper. You should replace
paper at this time to avoid running out while printing patient test results. See Figure 22.
To replace printer paper:
1 Remove the printer panel and remove the old roll of paper.
2 Peel off the beginning of the new roll of paper.
3 Place the paper in the instrument, with the paper feeding up from the bottom.
4 Insert the paper between the two black rubber rollers on the printer.
5 Flip the paper release lever forward.
6 Roll the manual paper advance wheel rearward. Advance enough paper to clear the printer cov-
er.
7 Flip the paper release lever backward.
8 Replace the printer panel, feeding the new strip of paper through the slot.
6–2
Figure 22 – Replacing Printer Paper
L–000867(A)