Set-Up And Operation - Clearaudio smart matrix SILENT User Manual

User manual / Bedienungsanleitung

3. Set-up and operation

3.1
smart matrix SILENT
Place the
The surface should be waterproof.
Please make sure that the machine is positioned safely and securely.
TIP: We recommend keeping a towel near the machine to mop up any fluid spillage.
3.2
Connect the mains cable to your
smart matrix SILENT
The
IMPORTANT:
Please read before you connect your
smart matrix SILENT
The
The correct voltage is indicated on the rear of your
Please make sure that you use the right voltage for your machine.
Pic. 1: IEC socket on the rear side
Pic. 2: Filling the cleaning fluid reservoir
6
machine on a clean, dry and stable surface.
smart matrix SILENT
must always be used with a grounded mains wall socket.
smart matrix SILENT
is available in both 230V and 110V versions.
Use your
indicated on the rear of the machine!
To switch off the device completely (to avoid
unnecessary standby consumption if it will not be
used for a long period of time) we recommend setting
the switch on the IEC socket to the position "0".
3.3 Filling the cleaning fluid reservoir
Remove the cap from the cleaning fluid reservoir and place the
filling funnel supplied into the hole (Pic. 2). Fill the fluid reservoir
with the Pure Groove cleaning fluid provided (max. 0.4l).
Then replace the cap.
For effective cleaning we recommend using only Clearaudio
Pure Groove cleaning fluid (available at www.analogshop.de).
and then to your wall socket.
to any power outlet:
smart matrix SILENT
smart matrix SILENT
© clearaudio electronic GmbH, 2019-06
.
only with the voltage