Aut / Eco - Larsen & Brusgaard PROTRACK II Manual

The PROTRACK II switches OFF.
We recommend that you switch OFF the PROTRACK II when traveling on commercial
flights, when driving in mountainous areas, and when the jump season is over.
NOTE: Customer settings (except altitude offset) are stored in nonvolatile memory when
the PROTRACK II is powered OFF.
When powered OFF, the PROTRACK II cannot be used for jumping.
To power the PROTRACK II ON, press any key until the unit beeps, then release the key.
The unit calibrates itself to the local elevation.
82

18.2 AUT / ECO

Press again and AUT/ECO flashes.
Press
18.2.1 Description
The PROTRACK II can be operated in two power modes:
Automatic and Economy.
18.2.2 Automatic (AUT)
In AUT mode the unit is active all the time and continually records the ambient air
or to toggle between AUT/ECO.
83