Altitude Offset - Larsen & Brusgaard PROTRACK II Manual

To leave a menu function, wait until the display times out, or press and hold
5 sec.
NOTE: The PROTRACK II goes out of ACCESS and back to the Main
Display if no button has been pressed within 30 sec.
All functions (except Power ON) can be performed ONLY when the PROTRACK II is
in ACCESS mode.
30

10 - Altitude Offset

for
Explanation:
If the Landing Zone (LZ) elevation is different from that of the aircraft takeoff, use the
altitude offset capability to set the difference prior to entering the airplane, or set the
altitude offset to zero when climbing through the LZ elevation.
MM-DD
HH-MM
31