Rear view
This section identifies the components and indicators on the rear of your
BladeCenter unit.
Switch module bay 4
Rear system LED panel
The LEDs on this panel provide status information for your BladeCenter unit. These
LEDs duplicate the LEDs in the front system LED panel. See "System LED panel"
Blower module
Blower LEDs: The LED on each blower provides status information about the
blower. For additional information, see the "Light Path Diagnostics
BladeCenter Hardware Maintenance Manual and Troubleshooting Guide on the IBM
BladeCenter Documentation CD.
Switch module
bay 3
Switch module 1
Blower module 2
Power module bay 4
Switch module 2
on page 36 for more information about these LEDs.
Blower error
LEDs
Power module
bay 3
Blower module 1
Power module 1
AC
DC
AC
DC
Rear system LED panel
Chapter 3. BladeCenter unit power, controls, and indicators
Management
module
Reserved
Power module 2
™
" section in the
33