Placing A Call With The Car Kit - Motorola Premium Wireless Car Kit User Manual

Removing All Phones
Action
1 Press the TALK button.
2 When prompted, say "Setup Menu."
The system responds: Setup menu. Please say a command.
3 Say "Remove all phones."
The system responds: Are you sure you want to remove all the phones?.
4 Say "Yes."
The system responds: All phones removed.

Placing a Call with the Car Kit

To place a call, you must first establish a Bluetooth link between the car kit and
your phone (see page 12).
You can place a call with the car kit in these ways:
• Dial a number from the phone.
• Digit dial with Voice Recognition.
• Use the system's Contact List.
• Speak a phone voice tag.
• Use the Speed Dial command.
• Use the Redial command.
• Use last number redial from the User Interface Module.
When connected, all of these calls are handsfree. You can terminate a VR
session at any time by pressing the END button.
Placing a Call with Voice Recognition
You can enter a phone number as 1 or more segments of digits. A segment can
include up to 15 digits. An entire number can include no more than 32 digits. You
can begin the number set with the * or # character.
Note: Speak numbers as continuous digits. For example, dictate 555-2211 as
"5-5-5-2-2-1-1", not "5-5-5-twenty-two-eleven."
Calling with a Whole Number
Action
1 Press the TALK button.
2 When prompted, say "Dial Number."
The system responds: Number please?.
15